CPD - Design for Manufacture & Assembly (DfMA) in Modern Construction

What if we had a magic wand to assemble buildings faster, more efficiently, and with less waste? It might sound too good to be accurate, but Design for Manufacture & Assembly (DfMA) in construction is making this dream a reality for the construction industry. Looking at the current scenario in the industry where there is a labour shortage, scarcity of building materials, and also a lack of proper planning towards sustainability, this method is just like a smart and fast way to build strong and high-quality buildings. With the rapid development of construction technology, you don’t have to wait any longer to construct your dream building. It can be done way faster, cheaper, and with less damage to the environment.

The governments of many developed countries have seen the disadvantages of traditional methods of construction. It can cause more project delays, increasing project costs, and most importantly be more damaging to the environment. But with the arrival of Design for Manufacture & Assembly (DfMA) in construction, project costs have been reduced by almost 35%. Not only that, but projects are now finished faster with an increased rate of almost 60%.

So, why has the College of Contract Management launched this course? This is due to how the need to learn about DfMA is becoming more important than ever. You will get all the knowledge that you can apply in your upcoming projects and stay ahead of the industry standards. Moreover, you learn about creating optimised designs, reducing material wastage on construction, and also improve the speed of your projects. So, make sure you stay till the end and join us in your learning journey.

What is Design for Manufacture & Assembly (DfMA) in construction?

It is a method that improves the overall building process from the start to the end of the construction process. This is done by reducing the overall project cost and the time of the construction. The Design for Manufacture & Assembly (DfMA) in construction is mainly based on two main principles, which are making the manufacturing process easy and a fast and easy process of assembly. It is possible to achieve these two criteria but only if you integrate them from the beginning of the process.

Earlier, the Design for Manufacture & Assembly (DfMA) in construction was divided mainly into two different methods. One of them was the Design for Manufacturing (DFM), and the other one was the Design for Assembly (DFA). The first one focuses on selecting the most budget-friendly construction process. It implies that buildings can still be made with less budget provided we know how to do it the smart way.

DFA (Design for Assembly) on the other hand, aims to minimise the entire assembly time of the components. It also tries to keep the construction cost efficient along with a reduced number of assembly steps. The DFA also does not believe in having many different variations of the build quality but focuses on specific building types that can save time and money during the process.

Benefits of Design for Manufacture & Assembly (DfMA) in construction

Design for Manufacture & Assembly (DfMA) in construction has entirely changed the industry. This is due to how it has been successful in addressing major challenges such as staff shortage, reduction in the building materials, and also the harmful environmental impacts. Apart from that, there are other benefits that we should know to better understand the topic. This section will highlight those benefits for you:

• It reduces the construction time to almost half. This is one of the major problems for builders and the construction industry. This can be done by improving the component design process and the manufacturing and assembly stages.
• DfMA is a better and improved version of traditional construction methods. It improves the quality of the construction and components by shifting the manufacturing process off-site. It can also create a required and controlled environment that doesn’t damage the material quality.
• Design for Manufacture & Assembly (DfMA) in construction ensures that the buildings are more reliable and there are fewer chances of accidents to happen. This is because of the fewer parts used in the construction process. After all, defects also cause delays in the projects.
• This method aims to save money from the starting stage of the construction in terms of materials production and assembly. It does this all while making sure the quality is not compromised.
• DfMA in construction has eliminated one of the biggest risks in the industry, which is the health and safety risks for workers. Workers now don’t have to deal anymore with heavy machinery or extreme weather conditions.
• Design for Manufacture & Assembly (DfMA) in construction focuses on reducing waste production and contributes towards the improvement of sustainability. This is because fewer construction parts in the project will lead to less construction and eventually reduce the number of waste and carbon emissions.

Course Description

Modern construction methods like offsite and modular building have been around for years, but still lack the recognition they deserve. Many professionals have limited knowledge of these techniques. The College of Contract Management is committed to helping students and professionals learn more about it. Our CPD on Design for Manufacture & Assembly (DfMA) in construction highlights the key differences between traditional and modern offsite methods.

Industry professionals will be the ones delivering the course lectures. They will share real-life case studies and industry-relevant insights to show how modern methods are successfully used. The professors will also support the lectures with actual examples of the cases where Design for Manufacture & Assembly (DfMA) in construction has benefited the project in some or the other way.

After the modules are completed, students will also have a chance to conduct live practical surveys and field visits to learn and understand DFA and DMA methods. This will help them understand the challenges that the construction industry faces while implementing these methods.

Course Structure

The entire syllabus of this CPD on Design for Manufacture & Assembly (DfMA) in construction has been to provide a clear and comprehensive understanding of the offsite construction methods. Every module of this course helps debunk different aspects of these methods and tells us how Design for Manufacture & Assembly (DfMA) in construction is different from the conventional methods. We have also tried to make the modules interesting with more field-based study programmes rather than just classroom learning. Let us have a look at the modules that you are going to study throughout the course:

1. DfMA: Introduction and Origin
2. Importance of DfMA Construction Methods
3. How to Improve Designs Using DfMA Construction Methods
4. Criteria on the Modern Building Methods
5. Difference Between Design for Manufacture and Assemble (DfMA) in Construction and Traditional Methods
6. Case Studies and Challenges for Construction Projects with DfMA Standards Implemented

Who can join this course?

We have designed this course on Design for Manufacture & Assembly (DfMA) in construction specifically for construction professionals and architects who want to help clients get the benefits from modern methods of construction. There are no specific requirements to join this course and we don’t expect you to also have prior knowledge about the topic. The College will train you from the beginning and help you master the concepts and be able to use them in real-life projects. All we need from you is the enthusiasm to learn and the drive to expand your abilities.

Learning how to use smart and efficient building methods with the CCM

The construction industry is no longer relying on old heavy machines and projects that are a risk to the environment. It has now become more about speed, efficiency, and sustainability. It is now integrating off-site construction, digital construction methods such as 3D concrete printing, and also modular construction. This means that those well-versed in DfMA will have more job security. With this expertise under your belt, you'll stand out among the rest.

The College of Contract Management has launched this CPD on Design for Manufacture & Assembly (DfMA) in construction, to help students have the relevant knowledge and skills according to their industry. As the leading course providers in the construction industry, they know the value of high-quality and industry-relevant knowledge. Their courses and the live lectures are the best places to learn and ask for advice regarding any project of yours if you have one. The College is very keen to help the students learn more about the modern methods of construction.

So, if you are still reading this, this is the sign that you should join this course. We are confident that this CPD will empower you to effectively learn and use the knowledge about offsite and modern methods of construction in your projects. We also have other courses that might interest you, so make sure you check out our website for more information about our courses.

The CPD on Design for Manufacture & Assembly (DfMA) in construction is undergoing its last and final bits before the official release. We know that we are taking longer than usual, but this is only because we want to give out the best courses to our students. So, we hope you can be a little more patient and build your excitement more for the release of this course. In the meantime, if you have any questions, know that you can always contact the CCM team via email or our live chat services.